3 Spring Assembly Spring Eye Bushing Spring Hanger Torque Rod Bushing Torque Rod End Bushing Cross-tube Equalizing Beam Center Bushing Saddle Assembly RT™ & RTE™ APPLICATION: VOCATIONAL Description P/N Qty. Rubber End Bushing & Adapter Service Kits 440 Kit (1 Wheel End) HTK34013-049L 4 520 Kit (1 Wheel End) HTK34013-050L 4 340 Kit (1 Wheel End) HTK34013-048L 4 Bar Pin End Bushing Service Kit Non shim (1 Wheel End) HTK34013-087L 4 Shim Type (1 Wheel End) HTK34013-088L 4 Rotating (1 Wheel End) HTK34013-188L 4 Center Bushings R340 Rubber HTK06664-000L 2 R340 Rubber w/ Loose End Plug HTK22279-000L 2 R380 Rubber HTK05919-000L 2 R380 Rubber w/ Loose End Plug HTK22282-000L 2 R400 Rubber HTK49400-000L 2 R400 Rubber w/ Loose End Plug HTK49600-000L 2 R520 Bronze Service Kit (2 Beams) HTK30437-000L 2 R520 Rubber HTK29483-005L 2 Cross Tube R480 44.88" HTK44643-009L 1 R340 44.88" HTK44642-008L 1 Cross Tube (Specify length to define last three digits in part number) HTK44643-XXX 1 Spring Assembly RT400 AUT50-267OE 2 RT400/403 AUT50-291OE 2 RT440 AUT50-215 2 RT480 AUT50-301 2 RTE400 AUT50-275 2 RTE480 AUT50-299 2 Spring Assembly (includes spring eye bushing) HTK45027-000 2 Torque Rods Tube End, Female, 5/8" Bushing & Hole Dia. HTK66610-000H 2 Spacer End, Male, 27" Straddle, 5/8" Bushing & Hole Dia. HTK66661-000H 2 Spacer End, Male, 27" Straddle, 3X1 1/4" Taper HTK66681-000H 2 Spacer End, Male, 27" Straddle, 2 X 1 1/8" Taper HTK66671-000H 2 Torque Rod Bushings (2.5" Wide) HTK44694-000L 2 (2.75" Wide) HTK44695-000L 2 (3" Taper) HTK44697-000L 2 Parts & Kits for RT & RTE Suspensions Qty. per suspension HTKRT403KIT* Hardware Kit for spring service. Includes the following Hendrickson parts: Qty HTK30550-001 8 ¾" bolt, used with 6" tall saddle, casting #57167 4 HTK22962-006 1" washer 8 HTK08017-000 Lock Nut 4 HTK00194-000 Spacer 1 HTK43146-000L Pin 1 HTK29828-035L Forward hanger lock pin bolt kit - bolt, washers and locknut 1 HTK33117-00 Grease Fitting 1 HTK29828-023 Hardware Kit for rear hanger service (often changed at the same time). Includes the following Hendrickson parts: Qty HTK22962-011 1/2" Hardened Washer 4 HTK24531-005 1/2"-13 UNCx6-1/2" Bolt 2 HTK49846-000 1/2"-13 UNC Locknut 2 HTK00194-000 Rebound Bolt Spacer 2 *Hardware kit for use with 6" tall saddle, casting #57167. For suspensions using 7 3/16" saddle height, casting #57143, use 30550-006 bolts (10" bolt). Hardware Kits
RkJQdWJsaXNoZXIy MTEyNjY3NA==