14 MIDWEST WHEEL COMPANIES SHOP TOOLS & EQUIPMENT STEERING / SUSPENSION / AXLES / WHEEL END TOOLS, CONTINUED Ball Joint Service Kit OT 7249 • Removes & installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins • Contains: 3 receiver tubes (2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D.) • Installation & removing adapters: 1 installing cup, 1 receiving cup, 1 installing adapter Strut Compressor TO 90102 Safely and efficiently removes and installs the spring-over steering stabilizer found on most self-steering axles. • Eliminates dangerous ratchet strap and pry-bar methods • Built-in measuring device enables accurate installation • 3/4" hex drive engineered for use with up to a 1/2" impact • 15" – 25" center-to-center working range Heavy Duty King Pin Press TO 90150 King pins can now be removed in minutes with relative ease and efficiency. • Generates 46,000 lbs of force yet weighs only 30 lbs! • 75% less weight than our closest competitor • Anti-torque arms prevent twisting of the main body while under extreme force • Engineered for use with up to a 1" impact wrench Application For use on straight and tapered king pins from 7/8" to 2 5/32" Isuzu NPR and GMC/Chevrolet W-series trucks require a custom adaptor (P/N 90150-15) Not compatible with: FL981 axles where the tie rod is cast to the spindle Leaf Spring Pin Socket Set TO 15110 Remove and install even the most stubborn threaded leaf spring and shackle pins on International, Peterbilt, Kenworth, Volvo, and Mack suspensions Set includes: • 15100 1.540" x .653" • 15101 1.098" x .647" • 15102 1.125" x .750" • 15103 .945" x .355" • 15104 1.460" x 1.260" Pin & Bushing Service Kit TO 15000 Service both rubber-isolated and threaded pins and bushings while the suspension remains on the vehicle • No need to handle or remove heavy suspension assemblies • 20 tons of pulling power for efficient removal & installation TO 15011 Adapter Kit Front Suspension Kenworth and Peterbilt Pin & Bushing #B65-1013 TO 10731 Pin and Bushing Upgrade Kit TO 15001-60 Adapter Pin TO 15001-40D 26" Threaded Rod Replacement parts for Rear Suspension Bushing Tool (OT 4244) OT 559016 Pushing Head OT 561037 Adapter OT 561036 Adapter 30-Ton King Pin / Brake Anchor Pin Pusher OT 4241 • King- and anchor-pin pusher with anchor pin adapters without hydraulics • Five special collars and two pins allow this unit to work on both straight and tapered kingpins • Accommodates sizes from 7/8" to 2" in diameter and up to 11-1/4" in length • With 30 tons of force, it can push out even the most corroded kingpins • The anchor pin can be removed quickly by using the special adapter installed in the pusher’s base block and the unit positioned over the brake’s spider PULLERS Grip-O-Matic Puller 2/3-Jaw 5-Ton Long Pullers With Reversible Jaws OT 1027 • Remove and install parts for fast, effective repairs • 5-1/2" max reach • 7" max spread • 9/16"-20 x 6-15/16" forcing screw • Jaw thickness: 5/16" upper, 1/4' lower • Jaw width: 3/8" upper, 3/4" lower 2pc Short Jaw Set OT 4536-4 Block Puller (Small) OT 4534-1 (Included in OTC Multipurpose Bearing and Pulley Puller Set)
RkJQdWJsaXNoZXIy MTEyNjY3NA==