16Zerostart Vibra Body Dump

MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 February 11, 2020 (16Zerostart Vibra Body Dump) ® phillipsandtemro.com VIBRA ™ P/N Model Cable Volts Amps Thrust Impact Force Length Width Operating Temperature Shipping Weight ZE 8000905 V2000 - 12 380 2000 lbs (907 kg) 35" (890 mm) 9" (230 mm) -30 to 140 °F -34 to 60 °C 89 lbs (40 kg) ZE 8000581 V2000 44' (13 m) 12 380 2000 lbs (907 kg) 35" (890 mm) 9" (230 mm) -30 to 140 °F -34 to 60 °C 89 lbs (40 kg) ZE 8000867 V3000 - 12 380 3000 lbs (1360 kg) 35" (890 mm) 9" (230 mm) -30 to 140 °F -34 to 60 °C 100 lbs (45 kg) ZE 8001014 V3000 44' (13 m) 12 380 3000 lbs (1360 kg) 35" (890 mm) 9" (230 mm) -30 to 140 °F -34 to 60 °C 100 lbs (45 kg) P/N Description ZE 8000980 Aluminum Mounting Plate P/N Description ZE 8001081 Shaft Bearing ZE 8001154 Coupling w/ Rubber Insert ZE 8001367 Steel Hood Cover ZE 8001006 End Cap (2) ZE 8001200 Insert Only (For Coupling) ZE 8001030 Motor ZE 8001251 Solenoid ZE 8001316 Switch VIBRA ACCESSORIES SERVICE PARTS INSTALLATION ▪ The Vibra ™ unit MUST be welded to at least three cross members. Stringers must be installed if cross members are not available. ▪ When mounting an aluminum body, use the aluminum mounting plate, #ZE 8000980. ▪ If mounted on a trailer or roll-off container, use an electrical quick connector capable of handling 380 amps. ▪ A separate grounding strap may be required if proper grounding can not be achieved through normal box to frame attachment hardware. ▪ Mount under forward 1/4 of body, as far forward as possible, parallel to body length. Vibrator (Mounted toward cab) Installation of Vibra on Truck Install push button on panel Positive battery terminal Solenoid switch Power cable