10Bioguard Biocide130004212021

MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 December 12, 2019 (10Bioguard Biocide) APPLICATIONS BioGuard ™ ULS is effective in controlling the growth of bacteria & other microorganisms that breed in all types of diesel fuel, biodiesel blends, gasoline and water which cause formation of slime, sludge and acids. Typical applications include truck fleets, farms, home heat, marine, power generation, railroad and all other on-road or off-road applications. BLENDING RECOMMENDATIONS Product should be added to the fuel in bulk storage tanks or directly to the equipment fuel tanks. Container Size Initial Treatment (Kill rate) Maintenance Treatment 1 gallon 1gallon to 2500 1 gallon treats up to 7400 gallons 55 gallons 1 gallon to 2500 1 gallon treats up to 7400 gallons 16 oz. 1 oz. to 28 gallons 1 oz. to 58 gallons 16 oz. treats 460 gals 16 oz. treats up to 920 gallons 32 oz. treats 920 gallons 32 oz. treats up to 1840 gallons Initial Treatment: To kill existing microorganisms & for best results, remove water bottoms from fuel storage tanks. Add the proper amount of BioGuard ™ ULS directly to the tank that is at least ½ full of fuel. Completely fill tank with fuel. Allow 2 hours or more before using. Check filters frequently for residue & change as necessary. Maintenance Treatment: Continue to treat subsequent fuel loads with BioGuard ™ ULS at the maintenance dosage. Continue to check filters and keep fuel free of water. BioGuard ™ can be used at concentrations between 1:1000 and 1:7400 (135ppm & 1000ppm). To prevent microorganism growth, continuously treat all fuel deliveries with BioGuard ™ ULS at the maintenance treatment dosage & keep fuel systems free of water. SAFETY PRECAUTIONS When handling this product, persons should exercise caution and wear protective goggles, gloves and clothing. See cautions indicated in the corresponding Safety Data Sheet before handling and storing this product. WARRANTY We guarantee this product to comply with our published specifications. Since the use of this product is beyond our control, we disclaim responsibility for its performance, handling, use, storage, the results obtained, or any injury of any nature resulting there from. Product warrantee and seller’s obligations apply only to replacement of product. Seller assumes no liability for any claim or loss of any other kind. In no event shall seller be liable for indirect punitive, special or consequential damages or expenses. Any warrantee claim shall be governed by and construed in accordance with the laws and jurisdiction of the State of Illinois. TYPICAL SPECIFICATIONS Color (ASTM D1544) ....................................................... Yellow Specific Gravity @ 68° F (ASTM D891) ............................. 1.098 Density, lbs./gal. (Calculated) .............................................. 9.14 Flash Point ºF, TCC (ASTM D3278. ........................................ 288 Additive Pour Point ºF (ASTM D97........................................... 70 The sulfur content of this fuel additive does not exceed 15 ppm.