MIDWESTWHEEL.COM MEMBER KANSAS CITY 5801 E. Front St. Main ....(816) 471-1552 Parts....(800) 821-7402 JOPLIN 2424 Stephens Blvd. Main ....(417) 717-6022 Parts....(866) 318-9111 SPRINGFIELD 812 Lillian Dr. ∙ Strafford, MO Main ....(417) 429-2476 Parts....(800) 785-3705 SIOUX CITY 1819 4th St. Main ....(712) 252-7969 Parts....(800) 943-3534 CEDAR RAPIDS 200 50th Ave. S.W. Main ....(319) 365-4453 Parts....(800) 332-5435 DES MOINES 1436 E. Ovid Ave. Main ....(515) 265-1491 Parts....(800) 888-0248 CLEAR LAKE 840 Hwy. 18 W. Main ....(641) 357-7101 Parts....(800) 397-5630 DAVENPORT 8502 Northwest Blvd. Main ....(563) 322-2671 Parts....(800) 553-1886 OMAHA 9770 S 142nd Street, Suite 1 Main ....(531) 239-3050 Parts....(800) 322-8757 NEBRASKA IOWA MISSOURI November 3, 2025 2:33 PM (07ConMet Wheel End Components) P/N Position Size - Diam. Shoe Width Overall Depth Surface - Width Flange Thickness (In) Bolt Hole Diam. (In) Ball Seat Nut Comp Weight (lb) C5 10009920 Front 15" 4" 9.18" 4.61 inch 0.50 inch 01.35 Yes 80 C5 10081828 Front 15" 4" 8.79" 4.66 inch 0.50 inch 01.10 No 75 C5 10014756 Front 16.5" 5" 9.37" 5.58 inch 0.50 inch 01.10 No 94 C5 10020147 Front 16.5" 5" 9.04" 5.25 inch 0.50 inch 01.10 No 92 C5 10033071 Front 16.5" 6" 9.74" 6.40 inch 0.63 inch 01.35 Yes 109 C5 10041055 Front 16.5” 7” 10.18’’ 7.43 inch 0.5 inch 01.10. No 102.6 C5 10009830 Rear 16.5" 7" 10.59" 7.56 inch 0.53 inch 01.10 Yes 112 C5 10080760 Front 16.5” 8” 11.06” 8.48 inch 0.53 inch 01.10 Yes 120 C5 10012097 Rear 16.5" 8.625" 11.49" 9.12 inch 0.62 inch 01.10 Yes 122 TruTurn® Brake Drums TruTurn® Drums are Inherently Balanced for Better Performance TruTurn brake drums are constructed using ConMet’s “turned-to-balance” machining process, which improves drum strength by eliminating the need for weld-on weights and balance cuts. Not only does this process make the drums stronger, but it creates other advantages such as uniform thermal expansion for reduced brake pulsing, and improved heat transfer, so the drum and brake linings stay cooler. Braking force is more evenly distributed, and occurrences of vibration and “judder” are minimized. With each stop, TruTurn brake drums maintain lower temperatures, maximize durability, minimize wear, and improve brake performance. • Drum strength is increased through “turned-to-balance” machining process • Full machining lowers drum temperature • Precisely machined surfaces reduce vibration • TruTurn drums are machined inside and out • Up to 10% in weight savings with TruTurn Lite TruTurn Brake Drums Benefits: • Machined inside and out over 95% of their surface area. This results in more uniformed heat distribution, reduced vibration, and better performance. • Outperform the competition both in lab tests and on the highway. Because of our unique machining process, they maintain their shape better than traditional cast brake drums. • Constructed using ConMet’s “turned-to-balance” machining process, which improves drum strength by eliminating the need for weld-on weights or balance cuts TruTurn Brake Drums Highlights:
RkJQdWJsaXNoZXIy MTEyNjY3NA==