6 MIDWEST WHEEL COMPANIES BATTERIES | ALTERNATORS | STARTERS | ACCESSORIES What you need to know about charging AGM or Gel‐Cell Batteries: • AGM or Gel‐Cell Batteries do not tolerate overcharging. Overcharging dissociates the water in the electrolyte, which is unable to be replaced, leading to premature failure. AGM batteries can easily be damaged if charged with conventional chargers, even automatic type chargers. • One charge with a conventional charger can permanently damage AGM or Gel‐Cell batteries creating the ‘walking wounded’ where a battery has been damaged by being charged improperly. The battery will appear to be working for a period of time after the overcharge and then prematurely fail. AE ESS6011 Intellamatic® 12/24 Volt 70/35 Amp Charger • 270 Amp Crank Assist at 12V • 70 Amp Power Supply Mode • SAFE for Sealed Lead Acid, AGM, and Gel Cell batteries • Polarity-protected and indicated • Built-in PATENTED diagnostics to detect weak or defective batteries • Deep discharge recovery of sulfated batteries • Tests batteries four times during charge cycle • Intellamatic® Smart Chargers with the DEAD BATTERY OVERRIDE (DBO) feature for extremely low voltage batteries. • “Safe in Any Weather” operation • Indicates 80% and 100% state of charge • Overcharge protection • Built-in reflash power supply mode • TWO-year bumper to bumper warranty and THREE-year limited warranty for transformer/rectifier • DOE Compliant and Energy-Efficient • Made in USA of US and Global Components Intellamatic® Smart Chargers provide the most reliable, feature-rich performance of any chargers made in the US today. AGM CHARGER ASSOCIATED INTELLAMATIC® SMART CHARGERS • Weather cover for vehicle plug • 2000 Amp rated cast brass clamps with angled jaws for better connections in tight areas • Handy storage case for cables in vehicle BDW20197 2 GA x 20 ft & 7.5 ft truck lead, quick connects BOOSTER CABLE SET • Tests batteries up to 2000 CCA • Narrow threaded shaft for fine adjustment • 1000 amp heavy gauge copper jaws in insulated clamps with “FlexiSpring” cable guards • Voltage sensing leads buried in cable to prevent damage Carbon Pile Load Tester 500 amp AE 6034 Heavy Duty Battery & Electrical System Analyzer AUT178.BSBAT155 • A true heavy duty application tester for batteries, alternators, and starters • Enables multiple battery testing while connected to the vehicle • Presents battery state of health as a percentage of life left • 100 - 6,000 Cold Cranking Amp (CCA) capacity • Infrared Temp Sensor increases accuracy of CCA measurement • Includes extra battery charging posts to simplify hookup • Tests 6V, 12V batteries and 12V, 24V charging systems • Test battery capacities from 40-2,000 CCA • Test all passenger vehicle batteries: AGM, Gel Cell, Flooded lead-acid, Start/Stop EFB, Commercial, SLI • Integrated printer to capture test results and customer records • Detachable test clamps for service and replacement • Full charging system test with diode/ripple test • Micro-load testing for proven, accurate results • 1-Year Warranty BOOSTER CABLES & CLAMPS EXTRA HEAVY DUTY CLAMP Parrot-Type for use with 2ga and 4ga cable DEK00184 Red/Black Pair Tough PVC Insulation, Color-Coded Tangle-Free Dual Cable Construction DEK04850 16 ft. x 6 ga Red/Black DEK04955 20 ft. x 4 ga Red/Black DEK04848 20 ft. x 2 ga Red/Black BOOSTER CABLES & CLAMPS BATTERY & ELECTRICAL SYSTEM TESTERS
RkJQdWJsaXNoZXIy MTEyNjY3NA==