00Wheel End Products Catalog130003042021

4 P/N BW KO41877 • • 1-1/2” 28 spline • • 6” with clevis VERSAJUST ™ SLACK ADJUSTERS MERITOR AUTOMATIC SLACK ADJUSTER Designed for Maximum Safety & Convenience: Use Genuine Slack Adjusters in Your Fleet! The Haldex S-ABA has a unique design that revolutionizes correct fit with easy installation, improved performance, extended service life and streamlined inventories. • • Establishes its own reference point • • Functions properly with the control arm setting itself at any angle within the total range of permissible control arm positions allowed • • Solves adjustment problems caused by incorrect installation • • Improves performance with a more sensitive adjustment rate • • Lowers the risk of over-adjustment during prolonged braking SELF SETTING AUTOMATIC BRAKE ADJUSTER (S-ABA) PROLINE HD ∙ C-STYLE AUTOMATIC SLACK ADJUSTERS P/N MD 40020212 • • 1-1/2” 28 spline • • 6” with 5/8” clevis pin hole Heat-treated housing to extend life and minimize internal wear. Heat-treated wormshaft for increased fatigue strength. Heat-treated internal gears made of high strength, high alloy steel to minimize wear. Self-setting control arm sets itself at any angle within the total range of permissible control arm positions allowed with current adjusters. The Bendix ® Versajust ™ Slack Adjuster is designed for use on S-Cam brakes – the most common type used on commercial vehicles. Built to last, the new Versajust slack is compatible with nearly any automatic slack adjuster or link-style ASA. What’s more, the Versajust slack is cross compatible (across each axle) with the Bendix ® ASA-5 ® slack adjuster. P/N GH AS1141 • • 1-1/2” 28 spline • • 6” with clevis pin hole The Gunite Automatic Slack Adjuster combines easy installation and outstanding performance in a double sealed package for longer brake lining life with consistent, safer brake performance. • • Straight or Offset clevis with 1/2” or 5/8” threads • • Unhanded design • • Compact housing for easy installation • • Double sealed actuator arm GUNITE AUTOMATIC SLACK ADJUSTERS • • Drilled worm wheel • • Factory lubricated and sealed • • Extended life clevis pin bushing • • O-Ring on spline gear The Meritor ASA, designed for a variety of commercial vehicle applications, is proven in hundreds of billions of service miles. The unique design keeps brakes in constant adjustment while eliminating the need for frequent under-the-truck brake adjustments, thereby reducing brake maintenance costs and vehicle safety inspection citations while allowing for optimum brake performance. FEATURES AND BENEFITS: • • Low-maintenance, long-life design with fewer moving parts • • No slip clutches to wear out • • Q Plus ™ LX500 extended-lube feature combines specially mated brake and Meritor ® ASA P/N RI R803112 NOW WITHOUT CLEVIS • • 1-1/2” 28 spline • • 6” with 5/8” clevis pin hole Clevis Options: P/N RI R810019 - Std. Stroke, Straight 5/8" P/N RI R810021 - Long Stroke, Straight 5/8" PRLPL-22103CR 1-1/2-28SP AUTO SLACK 5.0/6.0, PROLINE BRAND SENSING TYPE: CLEARANCE SENSING STROKE ADJUSTMENT: RELEASED POSITION: NON-HANDED CLUTCH ASSEMBLE: CONE CLUTCH SPRING: COIL BOOT: SEALED BUSHING: HEAT TREATED EXTERNAL HARDWARE: NO YOKE / CLEVIS: STD_1.380" YOKE / CLEVIS: N/A ADJUSTMENT CONTROL TYPE: LINKAGE PIN BACK-OFF ADJUSTMENT: BACK-OFF HEX_1/2 TURN/CCW GRADE OF GREASE: NLGI GRADE 1, LITHIUM GREASE OPERATING TEMP: HIGH +175° C, LOW -40° C S-CAM / WORM GEAR: MANUAL LUBRICATION NEW: PRE-GREASED LUBRICATION INTERVAL: 6-MTH OR 50,000 MILES